Waterproofing System for Pools / Reservoirs / Water Tanks – 5m²

Main Applications

Coverprime 1034 is a two-component polyurethane resin designed for waterproofing pools. With the application of Coverprime, the customer gains access to a high-quality material with elasticity, resistance to rupture, and abrasion.

The environment becomes much safer against leaks because the material penetrates into cracks and holes in the substrate, ensuring the end of leaks. The mixing ratio is 100 parts of component “A” to 34 parts of component “B”. Pot-life at 25°C varies between 40 and 50 minutes; Shore A hardness between 95 and 98; total curing in 24 hours after application. Yield: 2mm – 2.400 kg/m² 2.

Use Primer to ensure better adhesion of the polyurethane to the freshly treated substrate, we recommend applying directly on the surface. This is a more fluid material to allow better penetration of the polyurethane into the porosity of the substrate, completely sealing the surface. This is essential for the adhesion of Coverprime 1034 to the substrate.
Yield: 0.500 kg/m² 3.

Structural Mesh: mechanical reinforcement for waterproofing. Silica (anti-slip layer). In this step, after the curing of the last waterproofing layer, an anti-slip layer is applied to the entire surface to ensure excellent adhesion of the subsequent coating (tiles, ceramics, etc.).

Performance

Waterproofing System for Pools and Decks – 5m² This kit is designed to waterproof an area of 5m².

It includes:
– 4 buckets of 3,350 Kg (2.5 kg of component A and 0.850 kg of component B) of Waterproof Resin Coverprime 1034, totaling 13.4 kg
– 1 bucket of 3 Kg (2 kg of component A and 1 kg of component B) of Primer Resin, totaling 3 kg
– 6m² of Structural Mesh + 5kg of Silica +

Accessories: Mixer and gloves